Address
Ptno:73 , kalikanagar, viswabarathi school lane, Kalimandir, Bandlaguda Jagir, Telangana 500086
Work Hours
Open 24 Hours
Wired Sump to Tank Model
The Aditya Smart Automatic Water Level Controller – Sump to Tank Model is an intelligent automatic pump control system designed to manage water transfer from the underground sump to the overhead tank.
The controller continuously monitors both tank water level and sump water availability and automatically starts or stops the motor when required.
Built using industrial-grade electronic components, advanced sensing technology, and multiple protection features, the system ensures safe pump operation, prevents water overflow, protects the motor from damage, and provides reliable automatic water management.
This controller eliminates manual pump operation and ensures safe, efficient, and fully automatic water supply.
Automatic Motor Operation
The controller automatically manages pump operation based on tank and sump water levels.
• When the tank water level drops below 50%, the controller checks the sump water level.
• If sufficient water is available in the sump, the motor starts automatically.
• The motor runs until the tank reaches 100% (Full).
• Once the tank is full, the motor automatically stops.
This ensures the tank remains filled while preventing water overflow.
Intelligent Water Flow Detection
(Dry Run Protection)
After the motor starts, the controller verifies whether water is actually reaching the tank.
If water is flowing normally
• The motor continues running.
If water is not detected within 1 minute
The controller automatically:
• Stops the motor
• Turns OFF the Green Motor ON indicator
• Turns ON the red warning indicator
• Generates a beep alert every 10 seconds
This feature protects the pump from dry running and motor damage.
Automatic Restart After Water Availability
If the motor stops due to low sump water or dry run condition, the controller will monitor the sump level.
When the sump water level returns to a safe level:
• The controller automatically restarts the motor
• The tank is filled normally
This ensures continuous automatic operation without manual intervention.
Smart Power Recovery Protection
When power supply returns after a power failure:
• The controller gives a 2-second beep alert
• The system waits 1 minute before restarting the motor
This delay helps the MOTOR to :
• Confirm stable power supply
• Prevent motor damage due to voltage fluctuations
Only after confirming stable power then the motor start.
Manual Tank Filling Option (NEED Button)
If the tank level is above 50% and the user wants to fill the tank completely:
Press the NEED Button
Result:
• Motor starts immediately
• Tank fills normally
• Motor automatically stops at 100% tank level
This provides convenient manual control whenever needed.
Motor Operation Indicators
The controller provides clear visual indication of motor operation.
During pump operation:
• Motor ON Green LED glows
• Rotating LED indicators around the motor symbol show that the pump is actively running
This allows users to easily confirm motor activity.
Water Level Monitoring
Overhead Tank Levels
The controller monitors four tank levels:
• 25% – Low Level
• 50% – Medium Level
• 75% – High Level
• 100% – Tank Full
Sump Water Levels
The sump water level is monitored at three stages:
• Low
• Half
• Full
This ensures safe pump operation and accurate water level monitoring.
Sensor Technology
The system uses premium stainless steel sensors designed for long-term reliability.
SS316 Stainless Steel Sensors
• Rust resistant
• Anti-scaling design
• Long service life
• Accurate water level detection
Food-Grade Sensor Housing
Sensor housing is made from 100% food-grade plastic, making it safe for drinking water tanks.
Industrial Sensor Connector System
The controller uses a 10-Pin Industrial Connector for connecting sump and tank sensors.
Advantages:
• No wire tapping required
• Prevents loose wiring connections
• Reliable electrical contact
• Easy installation and servicing
• Long-term connection reliability
Electrical Safety Design
The controller is designed with high electrical safety standards.
Key safety features include:
• High-power industrial switching relays
• 5kV isolation transformer
• Shock-protection electrical design
This ensures safe and stable operation of the system.
Maintenance & Manual Control Options
The controller includes additional switches for maintenance and manual operation.
Manual Motor Start Switch
Allows manual motor operation when required.
Dry Run Bypass Switch
Used temporarily during maintenance.
Tank Full Test Switch
Allows quick testing of the tank full sensor and controller functionality.
Motor Compatibility
The controller supports:
• Single Phase Motors
• Three Phase Motors
Maximum supported motor capacity:
Up to 7.5 HP
Applications
The Aditya Smart Water Level Controller is ideal for:
• Residential houses
• Apartments
• Villas
• Commercial buildings
• Farm houses
• Borewell pumping systems
• Industrial water storage systems
Technical Specifications
| Feature | Specification |
| Product Name | Smart Automatic Water Level Controller |
| Model | Sump to Tank |
| Tank Level Monitoring | 25%, 50%, 75%, 100% |
| Sump Level Monitoring | Low, Half, Full |
| Motor Compatibility | Single Phase & Three Phase |
| Maximum Motor Capacity | Up to 7.5 HP |
| Sensors | SS316 Stainless Steel |
| Sensor Housing | Food Grade Plastic |
| Electrical Isolation | 5kV Isolation Transformer |
| Sensor Connection | 10-Pin Industrial Connector |
| Pump Protection | Dry Run + Water Flow Detection |
| Manual Control | NEED Button + Bypass Switch |
| Indications | LED Indicators + Warning Beep |