Key Features

Automatic Pump Operation

The controller automatically maintains the required water level in the overhead tank.

• Motor starts automatically when tank level falls below 50%
  • Motor stops automatically when tank reaches 100%
  • Ensures continuous water availability without manual monitoring

4-Level Tank Monitoring

The controller displays tank water levels clearly using four indicators.

Tank Level	Indication
25%	Low Level
50%	Half Level
75%	High Level
100%	Tank Full

This allows users to easily monitor tank water levels from the controller panel.

Intelligent Dry Run Protection

To protect the motor from dry running, the system verifies whether water is actually reaching the tank.

After the motor starts:

• The controller checks for water flow to the tank
  • If water is detected → Motor continues normal operation
  • If water is not detected within 1 minute, the controller automatically:
• Stops the motor
  • Turns OFF the motor running indicator
  • Activates Dry Run Warning LED
  • Generates alert beep every 10 seconds

This protects the pump from damage caused by dry running.

Water Flow Indication

During pumping operation, the controller provides visual water flow indication confirming that water is successfully reaching the tank.

Motor Running LED Animation

When the pump is operating, rotating LED indicators around the motor symbol provide a clear visual confirmation of motor operation.

Power Recovery Protection

When power supply returns after a power failure:

• The controller provides a 2-second power recovery beep
  • If tank level is below 50%, the controller waits 1 minute before starting the motor

This delay ensures that the power supply is stable and protects the motor from voltage fluctuations.

Manual Tank Filling (NEED Button)

If the tank level is above 50% but the user wants to fill the tank manually:

• Press the NEED Button
  • The motor starts immediately
  • The motor automatically stops when the tank reaches 100%

Installation & Maintenance Features

Industrial Sensor Connector

The controller uses a 10-Pin Industrial Connector for sensor wiring.

Advantages:

• No wire tapping required
  • Eliminates loose connections
  • Prevents wiring errors
  • Easy installation and maintenance

Dry Run Bypass Switch

A maintenance bypass switch is provided to temporarily disable dry run protection during servicing or troubleshooting.

Tank Full Test Switch

A Tank 100% Test Switch allows quick verification of sensor and controller operation.

This helps ensure proper device functionality during installation or maintenance.

Manual Motor Start Bypass

A manual bypass switch is provided to start the motor directly when required.

Safety Features

Shock-Proof Electrical Design

The controller is designed with high-isolation electrical architecture for maximum user safety.

Safety components include:

• High-power industrial switching relays
  • 5kV isolation transformer
  • Complete electrical isolation protection

This ensures shock-free operation even while the device is running.

Anti-Rust & Anti-Scaling Sensors

The system uses SS316 Grade Stainless Steel Sensors with Food-Grade Plastic Sensor Holders.

Benefits:

• Rust-proof sensors
  • Scale-resistant operation
  • Long sensor life
  • Safe for drinking water tanks

Motor Compatibility

The controller supports:

• Single Phase Motors
  • Three Phase Motors

Maximum recommended motor capacity:

Up to 7.5 HP

Technical Specifications

Parameter	Specification
Product Type	Automatic Water Level Controller
Model	Bore-to-Tank Controller
Tank Level Monitoring	4 Levels
Tank Levels	25%, 50%, 75%, 100%
Dry Run Protection	Yes
Water Flow Detection	Yes
Power Recovery Delay	1 Minute
Manual Motor Start	Available
Sensor Connector	10-Pin Industrial Terminal
Sensor Material	SS316 Stainless Steel
Sensor Housing	Food Grade Plastic
Electrical Isolation	5kV Transformer
Relay Type	High Power Industrial Relay
Motor Compatibility	1 Phase / 3 Phase
Maximum Motor Capacity	Up to 7.5 HP

Applications

Suitable for:

• Individual Homes
  • Apartments
  • Residential Buildings
  • Commercial Complexes
  • Borewell Pump Systems
  • Agricultural Water Systems
  • Water Storage Systems

Product Highlight

“Not just a water level controller – an intelligent pump protection system.”

Unlike ordinary water level controllers, the Aditya Smart Pump Controller verifies actual water flow after the motor starts. If water does not reach the tank within 1 minute, the system automatically stops the motor and alerts the user, preventing pump damage due to dry running.

Quick Feature Summary

✔ Automatic Motor Start & Stop
✔ Intelligent Dry Run Protection
✔ Water Flow Verification System
✔ 4 Level Tank Monitoring
✔ Power Recovery Delay Protection
✔ Manual Tank Fill (NEED Button)
✔ Motor Running LED Indication
✔ Industrial 10-Pin Sensor Connector
✔ Shock-Proof Electrical Isolation
✔ SS316 Stainless Steel Sensors
✔ Supports 1-Phase & 3-Phase Motors
✔ Motor Capacity up to 7.5 HP