Key Highlights

✔ Fully Automatic Pump Operation
✔ Wireless Installation – No Long Wiring
✔ Solar Powered Tank Sensor
✔ 1 Year Sump Sensor Battery Backup
✔ Intelligent Dry Run Protection
✔ Wireless Signal Loss Motor Protection
✔ Long Range Communication with Repeater Support
✔ Industrial Grade Safety Design
✔ SS316 Stainless Steel Sensors
✔ Supports Single Phase & Three Phase Motors

Automatic Tank Level Management

The system continuously monitors the overhead tank water level and automatically operates the motor.

Tank Level Monitoring

The controller monitors four water levels:

• 25% Level
  • 50% Level
  • 75% Level
  • 100% Level

Automatic Motor Operation

• Motor starts automatically when tank level drops below 50%
  • Motor stops automatically when tank reaches 100%

This ensures the tank remains filled without manual intervention.

Intelligent Water Flow Detection (Dry Run Protection)

After the motor starts, the controller verifies whether water is actually reaching the tank.

If water is detected

• Motor continues running normally

If water is NOT detected within 1 minute

The system automatically stops the motor to prevent pump damage.

Indications

• Motor ON LED turns OFF
  • Red warning LED turns ON
  • Beep alert every 10 seconds

This feature protects the pump from dry running and burning.

Smart Power Recovery Protection

When power supply returns after a power failure:

• Controller gives a 2-second beep alert
  • Motor start is delayed for 1 minute

Purpose

• Confirm power stability
  • Prevent motor damage from voltage fluctuations

Only after confirming stable power will the motor restart.

Manual Tank Filling Option

If the tank level is above 50% and the user wants to fill the tank manually:

Press the NEED Button

Result

• Motor starts immediately
  • Motor automatically stops at 100% tank level

Motor Operation Indicators

The controller provides clear visual indication of pump activity.

During motor operation

• Motor ON LED glows
  • Rotating LED indicators around motor symbol show pump activity

This allows users to easily confirm motor operation.

Maintenance & Manual Controls

The controller includes service and manual operation switches.

Dry Run Bypass Switch

Allows temporary bypass of dry run protection during maintenance.

Tank Full Test Switch

Used to test the 100% tank level sensor and device health.

Manual Motor Start Switch

Allows manual motor operation whenever required.

Industrial Sensor Connector System

The controller uses a 10-Pin Industrial Green Connector for sensor wiring.

Advantages

• No wire tapping required
  • Prevents loose connections
  • Reliable electrical contact
  • Easy installation and servicing

Electrical Safety Design

The controller is designed with high electrical safety standards.

Features include

• High-power industrial switching relays
  • 5KV isolation transformer
  • Completely shock-proof design

Even if someone touches the controller during operation, the system remains electrically safe.

Sensor Material Quality

Sensor electrodes are made using SS316 stainless steel.

Sensor body is made using food-grade plastic.

Advantages

• Rust resistant
  • Anti-scaling
  • Long service life
  • Safe for drinking water tanks

Motor Compatibility

The controller supports:

• Single Phase Motors
  • Three Phase Motors

Maximum Motor Capacity

Up to 7.5 HP

Advanced Wireless Communication System

The controller communicates wirelessly with the tank sensor and sump sensor.

Benefits

• No long cables required
  • Faster installation
  • Reliable wireless monitoring
  • Suitable for long distances

Tank Sensor Unit

The tank sensor is designed for outdoor rooftop installation.

Features

• Solar powered system
  • Built-in EV grade rechargeable battery

Battery Backup

Up to 90 days without sunlight

Installation

• SS304 stainless steel mounting stand
  • Waterproof enclosure
  • Long-distance wireless communication

Sump Sensor Unit

The sump sensor is installed inside the sump tank.

Features

• Fully waterproof construction
  • Dedicated rechargeable battery pack

Battery Backup

Up to 12 months after full charge

Low Battery Monitoring & Alerts

The system continuously monitors battery status of TANK & SUMP wireless devices.

Sump Sensor Low Battery

If the sump sensor battery becomes low:

Main controller indication:

• Sump Low Battery LED glows
  • 3 beep alert every 30 seconds

Tank Sensor Low Battery

If the tank sensor battery becomes low:

Main controller indication:

• Tank Low Battery LED glows
  • 3 beep alert every 30 seconds

Even after low battery warning, the system continues operating for approximately 15 days, allowing sufficient time for battery charging or replacement.

Wireless Signal Monitoring System

The controller continuously monitors wireless communication with the sensors.

Signal Communication Interval

• Tank sensor signal every 10 seconds
  • Sump sensor signal every 15 seconds

Wireless Signal Indicator LEDs

Good Signal Indication

• Tank communication: White LED blinks every 10 seconds
  • Sump communication: White LED blinks every 15 seconds

Bad Signal Indication

If wireless signal is not received:

Sump Signal Loss

• Orange LED glows at SUMP indicator on in controller Device

Tank Signal Loss

• Orange LED glows at TANK indicator on in controller Device

Signal Failure Alarm

If any wireless signal becomes unstable or lost:

• 2 beep alert every 30 seconds

Motor Safety During Signal Loss

If signal loss occurs while the motor is running:

The controller automatically stops the motor to prevent unsafe operation.

Long Range Wireless Communication

The system supports long-distance wireless communication.

If additional range is required:

• Wireless repeaters can be installed

For large installations:

• Multiple repeaters can be used.

Repeaters also display tank level signals.

Anti Cross Communication Technology

Each wireless controller system is programmed with a unique wireless ID.

Benefits

• Prevents cross communication with nearby systems
  • Reliable operation in apartments and crowded areas

Sump Battery Charging System

The sump battery charging system includes:

• SS304 rust-proof mounting plate
  • Smart charger with Battery Management System (BMS)

Battery Backup After Full Charge

More than 12 months

Technical Specifications

Specification	Details
Product Type	Wireless Bore-to-Tank Controller
Tank Level Monitoring	25%, 50%, 75%, 100%
Motor Start Level	Below 50%
Motor Stop Level	At 100%
Dry Run Protection	Yes
Signal Loss Protection	Yes
Tank Sensor Power	Solar + Battery
Tank Sensor Backup	Up to 90 Days
Sump Sensor Backup	Up to 12 Months
Wireless Range	Long Range with Repeater Support
Motor Compatibility	Single Phase / Three Phase
Maximum Motor Capacity	Up to 7.5 HP
Sensor Material	SS316 Stainless Steel
Sensor Body	Food Grade Plastic
Electrical Isolation	5KV Isolation Transformer
Connector Type	10-Pin Industrial Connector

Ideal Applications

The system is suitable for:

🏠 Individual Houses
🏢 Apartments
🏗 Residential Buildings
🚜 Farm Houses
🏨 Commercial Buildings
🏥 Hospitals
🏫 Schools & Institutions

Why Choose Aditya Electronic Solutions

• Advanced Wireless Technology
  • Smart Motor Protection System
  • Solar Powered Sensors
  • Long Battery Backup
  • Industrial Grade Components
  • Reliable Long Distance Communication
  • Designed for Indian Water Systems