Address
Ptno:73 , kalikanagar, viswabarathi school lane, Kalimandir, Bandlaguda Jagir, Telangana 500086
Work Hours
Open 24 Hours
Wireless Bore-to-Tank Automatic Water Level Controller
Smart Water Control Technology
The Aditya Wireless Bore-to-Tank Water Level Controller is an advanced intelligent pump automation system designed to automatically manage water transfer from borewell to overhead tanks.
Using solar-powered wireless sensors, intelligent motor protection, and industrial-grade electronics, the system ensures safe, reliable, and efficient water management for homes, apartments, farm houses, and commercial buildings.
Unlike traditional wired controllers, this system eliminates long wiring and provides long-range wireless monitoring with automatic motor protection.
Key Highlights
✔ Fully Automatic Pump Operation
✔ Wireless Installation – No Long Wiring
✔ Solar Powered Tank Sensor
✔ 1 Year Sump Sensor Battery Backup
✔ Intelligent Dry Run Protection
✔ Wireless Signal Loss Motor Protection
✔ Long Range Communication with Repeater Support
✔ Industrial Grade Safety Design
✔ SS316 Stainless Steel Sensors
✔ Supports Single Phase & Three Phase Motors
Automatic Tank Level Management
The system continuously monitors the overhead tank water level and automatically operates the motor.
Tank Level Monitoring
The controller monitors four water levels:
• 25% Level
• 50% Level
• 75% Level
• 100% Level
Automatic Motor Operation
• Motor starts automatically when tank level drops below 50%
• Motor stops automatically when tank reaches 100%
This ensures the tank remains filled without manual intervention.
Intelligent Water Flow Detection (Dry Run Protection)
After the motor starts, the controller verifies whether water is actually reaching the tank.
If water is detected
• Motor continues running normally
If water is NOT detected within 1 minute
The system automatically stops the motor to prevent pump damage.
Indications
• Motor ON LED turns OFF
• Red warning LED turns ON
• Beep alert every 10 seconds
This feature protects the pump from dry running and burning.
Smart Power Recovery Protection
When power supply returns after a power failure:
• Controller gives a 2-second beep alert
• Motor start is delayed for 1 minute
Purpose
• Confirm power stability
• Prevent motor damage from voltage fluctuations
Only after confirming stable power will the motor restart.
Manual Tank Filling Option
If the tank level is above 50% and the user wants to fill the tank manually:
Press the NEED Button
Result
• Motor starts immediately
• Motor automatically stops at 100% tank level
Motor Operation Indicators
The controller provides clear visual indication of pump activity.
During motor operation
• Motor ON LED glows
• Rotating LED indicators around motor symbol show pump activity
This allows users to easily confirm motor operation.
Maintenance & Manual Controls
The controller includes service and manual operation switches.
Dry Run Bypass Switch
Allows temporary bypass of dry run protection during maintenance.
Tank Full Test Switch
Used to test the 100% tank level sensor and device health.
Manual Motor Start Switch
Allows manual motor operation whenever required.
Industrial Sensor Connector System
The controller uses a 10-Pin Industrial Green Connector for sensor wiring.
Advantages
• No wire tapping required
• Prevents loose connections
• Reliable electrical contact
• Easy installation and servicing
Electrical Safety Design
The controller is designed with high electrical safety standards.
Features include
• High-power industrial switching relays
• 5KV isolation transformer
• Completely shock-proof design
Even if someone touches the controller during operation, the system remains electrically safe.
Sensor Material Quality
Sensor electrodes are made using SS316 stainless steel.
Sensor body is made using food-grade plastic.
Advantages
• Rust resistant
• Anti-scaling
• Long service life
• Safe for drinking water tanks
Motor Compatibility
The controller supports:
• Single Phase Motors
• Three Phase Motors
Maximum Motor Capacity
Up to 7.5 HP
Advanced Wireless Communication System
The controller communicates wirelessly with the tank sensor and sump sensor.
Benefits
• No long cables required
• Faster installation
• Reliable wireless monitoring
• Suitable for long distances
Tank Sensor Unit
The tank sensor is designed for outdoor rooftop installation.
Features
• Solar powered system
• Built-in EV grade rechargeable battery
Battery Backup
Up to 90 days without sunlight
Installation
• SS304 stainless steel mounting stand
• Waterproof enclosure
• Long-distance wireless communication
Sump Sensor Unit
The sump sensor is installed inside the sump tank.
Features
• Fully waterproof construction
• Dedicated rechargeable battery pack
Battery Backup
Up to 12 months after full charge
Low Battery Monitoring & Alerts
The system continuously monitors battery status of TANK & SUMP wireless devices.
Sump Sensor Low Battery
If the sump sensor battery becomes low:
Main controller indication:
• Sump Low Battery LED glows
• 3 beep alert every 30 seconds
Tank Sensor Low Battery
If the tank sensor battery becomes low:
Main controller indication:
• Tank Low Battery LED glows
• 3 beep alert every 30 seconds
Even after low battery warning, the system continues operating for approximately 15 days, allowing sufficient time for battery charging or replacement.
Wireless Signal Monitoring System
The controller continuously monitors wireless communication with the sensors.
Signal Communication Interval
• Tank sensor signal every 10 seconds
• Sump sensor signal every 15 seconds
Wireless Signal Indicator LEDs
Good Signal Indication
• Tank communication: White LED blinks every 10 seconds
• Sump communication: White LED blinks every 15 seconds
Bad Signal Indication
If wireless signal is not received:
Sump Signal Loss
• Orange LED glows at SUMP indicator on in controller Device
Tank Signal Loss
• Orange LED glows at TANK indicator on in controller Device
Signal Failure Alarm
If any wireless signal becomes unstable or lost:
• 2 beep alert every 30 seconds
Motor Safety During Signal Loss
If signal loss occurs while the motor is running:
The controller automatically stops the motor to prevent unsafe operation.
Long Range Wireless Communication
The system supports long-distance wireless communication.
If additional range is required:
• Wireless repeaters can be installed
For large installations:
• Multiple repeaters can be used.
Repeaters also display tank level signals.
Anti Cross Communication Technology
Each wireless controller system is programmed with a unique wireless ID.
Benefits
• Prevents cross communication with nearby systems
• Reliable operation in apartments and crowded areas
Sump Battery Charging System
The sump battery charging system includes:
• SS304 rust-proof mounting plate
• Smart charger with Battery Management System (BMS)
Battery Backup After Full Charge
More than 12 months
Technical Specifications
| Specification | Details |
| Product Type | Wireless Bore-to-Tank Controller |
| Tank Level Monitoring | 25%, 50%, 75%, 100% |
| Motor Start Level | Below 50% |
| Motor Stop Level | At 100% |
| Dry Run Protection | Yes |
| Signal Loss Protection | Yes |
| Tank Sensor Power | Solar + Battery |
| Tank Sensor Backup | Up to 90 Days |
| Sump Sensor Backup | Up to 12 Months |
| Wireless Range | Long Range with Repeater Support |
| Motor Compatibility | Single Phase / Three Phase |
| Maximum Motor Capacity | Up to 7.5 HP |
| Sensor Material | SS316 Stainless Steel |
| Sensor Body | Food Grade Plastic |
| Electrical Isolation | 5KV Isolation Transformer |
| Connector Type | 10-Pin Industrial Connector |
Ideal Applications
The system is suitable for:
🏠 Individual Houses
🏢 Apartments
🏗 Residential Buildings
🚜 Farm Houses
🏨 Commercial Buildings
🏥 Hospitals
🏫 Schools & Institutions
Why Choose Aditya Electronic Solutions
• Advanced Wireless Technology
• Smart Motor Protection System
• Solar Powered Sensors
• Long Battery Backup
• Industrial Grade Components
• Reliable Long Distance Communication
• Designed for Indian Water Systems