Address
Ptno:73 , kalikanagar, viswabarathi school lane, Kalimandir, Bandlaguda Jagir, Telangana 500086
Work Hours
Open 24 Hours
Smart Wireless Sump to Tank Water Level Controller
Advanced Long-Range Automatic Pump Control System
By Aditya Electronic Solutions – Hyderabad
The Aditya Smart Wireless Water Level Controller is an advanced automation system designed to intelligently manage water pumping from sump to overhead tank without manual monitoring or long wiring.
Using long-range wireless communication, solar-powered sensors, intelligent motor protection, and industrial-grade electronics, the system ensures safe, reliable, and fully automatic water management.
It eliminates wiring between sump and tank, protects the motor from dry run and signal loss, and ensures dependable operation even in long-distance installations.
Perfect for:
✔ Individual Houses
✔ Apartments
✔ Villas
✔ Commercial Buildings
✔ Farm Houses
✔ Large Properties
Key Benefits
No Wiring Between Sump and Tank
Traditional controllers require long wiring between sump and tank.
The Aditya wireless system uses advanced RF communication, eliminating wiring completely.
Advantages
• Faster installation
• No wire damage problems
• Ideal for long-distance installations
• Clean and professional setup
Fully Automatic Pump Operation
The system automatically controls motor operation based on water levels.
Motor Starts Automatically When
• Tank level falls below 50%
• Sump water is available
Motor Stops Automatically When
• Tank becomes 100% full
• Sump water becomes low
This prevents water overflow and dry run motor damage.
Smart Water Flow Detection
When the motor starts, the controller verifies whether water is actually reaching the tank.
If water is not detected within 1 minute:
• Motor automatically switches OFF
• Red warning indicator activates
• Beep alert every 10 seconds
This protects the motor from:
• Dry run
• Pipeline blockage
• Air lock problems
Intelligent Wireless Signal Monitoring
The system continuously monitors communication between devices.
Signal Update Frequency
• Tank signal every 10 seconds
• Sump signal every 15 seconds
If signal is lost:
• Bad signal warning appears
• 2 beep alerts every 30 seconds
If signal is not restored within 1 minute during motor operation, the controller automatically stops the motor to protect the pump.
Unique ID Wireless Technology
Each device is programmed with a unique wireless communication ID.
Benefits:
✔ Prevents signal interference
✔ No cross communication between nearby systems
✔ Reliable operation in apartments and dense areas
Long-Range Wireless Communication
Designed for long-distance installations.
Features:
• Long-range RF wireless communication
• Optional Smart Repeater for extended range
• Multiple repeaters can be installed for very long distances
The repeater unit also displays tank level indicators.
Ideal for:
• Large buildings
• Farms
• Industrial sites
• Long-distance tanks
System Components
Control Unit (Motor Controller)
Installed near the motor starter panel.
Functions:
• Controls pump operation
• Displays tank and sump status
• Shows alerts and system status
Tank Sensor Unit
Installed on the overhead tank to monitor tank water level.
Tank Level Detection
• 25%
• 50%
• 75%
• 100%
Sump Sensor Unit
Installed inside the sump to monitor water availability.
Sump Level Detection
• Low
• Half
• Full
The motor operates only when sufficient water is available.
Solar Powered Tank Sensor
The tank sensor operates using:
• High-efficiency solar panel
• High-quality EV-grade rechargeable battery
Backup Capability
Up to 90 days operation without sunlight
Construction:
• SS304 stainless steel mounting stand
• Fully waterproof enclosure
• Outdoor long-life design
Long Backup Sump Sensor Battery
The sump sensor unit includes:
• Built-in battery bank
• Battery Management System (BMS) protection
Backup performance:
Up to 12 months operation after full charge
Charging:
Users can easily recharge using the provided smart charger.
Mounting:
• SS304 rust-proof mounting plate
Smart Battery Monitoring Alerts
The controller continuously monitors sensor battery levels.
Sump Battery Low
• Blue low battery indication
• 3 beep alerts every 30 seconds
Even after warning, the system continues operating for up to 15 days.
Tank Battery Low
• Low battery indicator appears on controller
• Alert beep notification
Motor Protection Features
Dry Run Protection
Motor automatically stops if:
• Sump becomes empty
• No water flow detected
Signal Loss Protection
If wireless communication fails for more than 1 minute, the motor automatically stops.
Power Failure Recovery Protection
After electricity returns:
The controller waits 1 minute before restarting the motor.
This ensures voltage stability and safe motor operation.
Manual Control Features
NEED Button (Instant Tank Filling)
Allows user to manually start the motor when required.
Example:
If tank is above 50% but user wants to fill completely:
Press NEED button → Motor starts immediately → Stops automatically at 100% tank level.
Maintenance Bypass Controls
For service or troubleshooting, the controller includes:
• Dry Run Bypass Switch
• Manual Motor Start Bypass
• Tank Full Test Switch
Industrial-Grade Electrical Design
Built using high-reliability industrial components.
Includes:
• High-power switching relays
• 5kV isolation transformer for shock protection
• Industrial electrical protection design
This ensures maximum safety and long service life.
Premium Sensor Materials
Sensors are manufactured using high-quality materials.
• SS316 stainless steel probes
• Food-grade plastic housing
Advantages:
✔ Rust-proof
✔ Scaling-resistant
✔ Long-life durability
Easy Installation System
The controller uses a 10-pin industrial connector for sensor connections.
Benefits:
✔ No wire tapping required
✔ No loose connection problems
✔ Reliable long-term operation
✔ Faster installation
Motor Compatibility
Compatible with:
✔ Single Phase Motors
✔ Three Phase Motors
Maximum supported motor capacity:
Up to 7.5 HP
Technical Specifications
| Feature | Specification |
| System Type | Wireless Sump to Tank Controller |
| Tank Levels | 25%, 50%, 75%, 100% |
| Sump Levels | Low, Half, Full |
| Wireless Communication | Long Range RF |
| Signal Monitoring | Tank 10s, Sump 15s |
| Motor Type | 1 Phase / 3 Phase |
| Maximum Motor Capacity | Up to 7.5 HP |
| Tank Sensor Power | Solar + EV Battery |
| Tank Backup | Up to 90 Days |
| Sump Battery Backup | Up to 12 Months |
| Sensor Material | SS316 Stainless Steel |
| Mounting Material | SS304 |
| Protection Features | Dry Run, Signal Loss, Water Flow |
| Unique ID Communication | Yes |
| Repeater Support | Yes |