Address
Ptno:73 , kalikanagar, viswabarathi school lane, Kalimandir, Bandlaguda Jagir, Telangana 500086
Work Hours
Open 24 Hours
Wired Bore-to-Tank Automatic Water Level Controller
The Smart Automatic Water Level Controller – Bore-to-Tank Model is an advanced pump automation system designed to automatically transfer water from borewell to overhead tanks while ensuring safe and efficient motor operation.
The system continuously monitors tank water levels and automatically starts or stops the pump as required. It also incorporates intelligent dry-run protection, water flow verification, power recovery delay protection, and manual override controls, ensuring reliable and long-term pump protection.
Designed using industrial-grade components, electrical isolation safety architecture, and corrosion-resistant sensors, the controller delivers dependable performance for homes, apartments, commercial buildings, and agricultural water systems.
Key Features
Automatic Pump Operation
The controller automatically maintains the required water level in the overhead tank.
• Motor starts automatically when tank level falls below 50%
• Motor stops automatically when tank reaches 100%
• Ensures continuous water availability without manual monitoring
4-Level Tank Monitoring
The controller displays tank water levels clearly using four indicators.
| Tank Level | Indication |
| 25% | Low Level |
| 50% | Half Level |
| 75% | High Level |
| 100% | Tank Full |
This allows users to easily monitor tank water levels from the controller panel.
Intelligent Dry Run Protection
To protect the motor from dry running, the system verifies whether water is actually reaching the tank.
After the motor starts:
• The controller checks for water flow to the tank
• If water is detected → Motor continues normal operation
• If water is not detected within 1 minute, the controller automatically:
• Stops the motor
• Turns OFF the motor running indicator
• Activates Dry Run Warning LED
• Generates alert beep every 10 seconds
This protects the pump from damage caused by dry running.
Water Flow Indication
During pumping operation, the controller provides visual water flow indication confirming that water is successfully reaching the tank.
Motor Running LED Animation
When the pump is operating, rotating LED indicators around the motor symbol provide a clear visual confirmation of motor operation.
Power Recovery Protection
When power supply returns after a power failure:
• The controller provides a 2-second power recovery beep
• If tank level is below 50%, the controller waits 1 minute before starting the motor
This delay ensures that the power supply is stable and protects the motor from voltage fluctuations.
Manual Tank Filling (NEED Button)
If the tank level is above 50% but the user wants to fill the tank manually:
• Press the NEED Button
• The motor starts immediately
• The motor automatically stops when the tank reaches 100%
Installation & Maintenance Features
Industrial Sensor Connector
The controller uses a 10-Pin Industrial Connector for sensor wiring.
Advantages:
• No wire tapping required
• Eliminates loose connections
• Prevents wiring errors
• Easy installation and maintenance
Dry Run Bypass Switch
A maintenance bypass switch is provided to temporarily disable dry run protection during servicing or troubleshooting.
Tank Full Test Switch
A Tank 100% Test Switch allows quick verification of sensor and controller operation.
This helps ensure proper device functionality during installation or maintenance.
Manual Motor Start Bypass
A manual bypass switch is provided to start the motor directly when required.
Safety Features
Shock-Proof Electrical Design
The controller is designed with high-isolation electrical architecture for maximum user safety.
Safety components include:
• High-power industrial switching relays
• 5kV isolation transformer
• Complete electrical isolation protection
This ensures shock-free operation even while the device is running.
Anti-Rust & Anti-Scaling Sensors
The system uses SS316 Grade Stainless Steel Sensors with Food-Grade Plastic Sensor Holders.
Benefits:
• Rust-proof sensors
• Scale-resistant operation
• Long sensor life
• Safe for drinking water tanks
Motor Compatibility
The controller supports:
• Single Phase Motors
• Three Phase Motors
Maximum recommended motor capacity:
Up to 7.5 HP
Technical Specifications
| Parameter | Specification |
| Product Type | Automatic Water Level Controller |
| Model | Bore-to-Tank Controller |
| Tank Level Monitoring | 4 Levels |
| Tank Levels | 25%, 50%, 75%, 100% |
| Dry Run Protection | Yes |
| Water Flow Detection | Yes |
| Power Recovery Delay | 1 Minute |
| Manual Motor Start | Available |
| Sensor Connector | 10-Pin Industrial Terminal |
| Sensor Material | SS316 Stainless Steel |
| Sensor Housing | Food Grade Plastic |
| Electrical Isolation | 5kV Transformer |
| Relay Type | High Power Industrial Relay |
| Motor Compatibility | 1 Phase / 3 Phase |
| Maximum Motor Capacity | Up to 7.5 HP |
Applications
Suitable for:
• Individual Homes
• Apartments
• Residential Buildings
• Commercial Complexes
• Borewell Pump Systems
• Agricultural Water Systems
• Water Storage Systems
Product Highlight
“Not just a water level controller – an intelligent pump protection system.”
Unlike ordinary water level controllers, the Aditya Smart Pump Controller verifies actual water flow after the motor starts. If water does not reach the tank within 1 minute, the system automatically stops the motor and alerts the user, preventing pump damage due to dry running.
Quick Feature Summary
✔ Automatic Motor Start & Stop
✔ Intelligent Dry Run Protection
✔ Water Flow Verification System
✔ 4 Level Tank Monitoring
✔ Power Recovery Delay Protection
✔ Manual Tank Fill (NEED Button)
✔ Motor Running LED Indication
✔ Industrial 10-Pin Sensor Connector
✔ Shock-Proof Electrical Isolation
✔ SS316 Stainless Steel Sensors
✔ Supports 1-Phase & 3-Phase Motors
✔ Motor Capacity up to 7.5 HP